Flagged Condition Rules Detail

Telemetry criteria designates what data/readings will trigger a flagged condition after evaluation. On the Telemetry Criteria pane you can select either Generic or Bundled criteria.

Generic Criteria

The Telemetry Criteria pane shows following information for generic criteria:

• Step: The step number indicating the order in which telemetry data is evaluated

• Operand: Determines how the evaluation for the step relates to the other steps in the telemetry criteria; options are:

  • Blank: No operand; Step #1 in the telemetry criteria is typically blank

  • And: The evaluation for this step must also be true in addition to the other step(s) in order to meet criteria

  • Or: The evaluation for this step can be true rather than another step in order to meet criteria

  • Or if unconfigured above: Same as Or but only if the above step is not configured

  • And not exists: The system variable for this step must not register in the telemetry data in order to meet criteria; Function and Criteria do not apply to steps with this operand

  • And exists: The system variable for this step must register in the telemetry data in order to meet criteria; Function and Criteria do not apply to steps with this operand

  • And exists in time frame: The system variable for this step must register within the calculation time frame in order to meet criteria; Function and Criteria do not apply to steps with this operand

  • And after above event: The evaluation for this step must be true after the previous step in order to meet criteria

  • And before above event: The evaluation for this step must be true after the previous step in order to meet criteria

• System variable (component): The component to be evaluated

• Offset

• Function

• Criteria